Tank Cleaning Service Auburndale

Septic tanks are a great solution for remote or urban property owners who either cannot or do not want to be part of a municipal sewage system. A septic system is connected directly to the pipes of the residence or business and serves as an immediate filter and containment unit for water-bound domestic waste. There are certain risks related to the installation and maintenance of a septic tank; such risks have resulted in rules that need to be followed to protect the environment and property especially with the regular removal of the contents of the tank by a vacuum truck.

Frequency

Depending on the size of the unit and the household, a tank must be emptied every three to five years. This is necessary not only because of space limitations but also because the tank needs to be inspected with some regularity to check for cracks, leaks and blockages. Other reasons are as follows:

    • Emergencies – Pumping can also become necessary in cases of emergency. Sewage backup and drain clogging may occur due to blockages which need to be cleared immediately to keep the problem from escalating. Flooding can cause similar problems.

 

    • Precautionary Measure – Emptying the primary container can also be a precautionary measure when there are many household members; parties with many guests; or other circumstances where many people would be using the toilets.

 

    • Odors – Sometimes tanks are suctioned due to permeating sewer odors escaping from the system as that could be a symptom of leaking gas needing to be repaired separately. Evidence of septic failure must be attended to immediately by a professional repair company.

 

  • Selling Property – It is also customary to pump out the septic system before selling property.

Septic tanks serve a very useful purpose for many households. As long as properly maintained by regular pumping, cleaning and inspections, they should correctly function under all conditions and for a long service life. Hopefully this information will be helpful in knowing how a septic tank is cleaned!

Follow these safety tips given below when inspecting your septic system:

1. Septic tank lid
Make sure that the access port of your tank is covered with a solid lid. Make sure that the lid is strong enough. Kids should not be able to open it. If you have no idea as to how to install the system, you can call a professional for help. The company will be more than happy to help with the inspection.

2. The tank opening
You should never lean over the septic tank opening. The reason is that the gasses that come out of the tank may knock you out. You may also fall in the tank, which may prove fatal.

3. Driving Over The septic system
Driving heavy machine on the ground where the tank system is buried is not a good idea. Actually, you may have to bear heavy costs in order to get the broken pipes repaired. So, make sure you don’t drive heavy equipment or machinery on the ground where you buried the tank system.

Contact Info:
Name: Billy Fowler
Email: info@asapadvancedseptic.com
Organization: ASAP Advanced Septic & Drainage, Inc.
Address: 5011 E Busch Blvd, Tampa, FL 33617
Phone: (813) 986-6070

Tips for Maintaining Your Septic Tank

Septic Pumping Company

Septic system problems can occur and worsen extremely quickly. Learn how to identify issues with septic drain fields so that you can minimize damage and get the necessary repairs as soon as possible.

When you live in an area that is not connected to a municipal sewer system, your septic tank and system are an essential part of your day-to-day life. As such, it's vital to keep them in good working order and to deal with any issues that come up as soon as possible. Septic system drain fields, in particular, often experience issues. Find out what problems to keep an eye out for, and how your local septic repair and service firm can resolve them so that your septic system stays in top shape.

Drain fields are the part of your septic system where organic liquid waste drains out of the septic tank and is treated. After solid waste settles to the bottom of the septic tank, the remaining wastewater passes into perforated pipes. These pipes are covered by a layer of soil and disperse the wastewater over a large area. The wastewater then travels through a layer of gravel, then through a layer of soil. Here, bacteria in the soil filter the wastewater so that it is neutral before it reaches a groundwater level.

Your drain field is the unseen hero of your septic system. From root removal to tank clean out, make sure you take care of it so that it will stay healthy and intact for years to come.

 

Septic Drain Field Problems and Repair: What to Look for and How to Get the Help You Need

Septic Pumping

Septic tank systems become clogged with roots in the leach lines, leach field, drain field or seepage field, causing backup of wastewater into the house. The inexpensive fix is to use copper sulfate through an installed cleanout or septic field pump.

Septic tank systems

Septic tank systems do not last forever and replacing one is a very expensive proposition. If your house is connected to the city sewer system, then you do not have a septic tank. A septic tank can be described as your very own little sewage treatment plant. There are three basic elements of a septic system:

  1. The septic line that carries sewage and waste water from your house to the tank. There is usually a cleanout plug at the house-end it so that you can run a snake down it to remove obstructions.
  2. The septic tank itself where sewage is held while undergoing decomposition. This is underground, probably under a grassy area, and has a cover that is usually buried in residential installations.
  3. The leach field, also referred to as a drain field or seepage field. This is a branching network of underground porous trenches, pipes or something similar that carries the clear liquid from the septic tank throughout adjacent soil where it is absorbed.

A clogged leach field

Eventually leach fields become clogged because the roots from trees and other vegetation are attracted to the nutrient-rich effluent. The roots grow through the pores intended to drain the liquid, seepage gradually slows or stops.

If sufficient pressure cannot be released through the pores of the leach field, the entire septic system cannot accept any more waste water and it backs up in the house, usually at a low point such as a shower or tub drain. If it gets that bad, you may have to replace the entire leach field. In many localities, that will require a building permit and meeting current building codes, which means replacing the entire septic system, which is expensive, etc.

Kill roots with copper sulfate

Since this is obviously something to avoid, you can often extend the life of the old system by taking action when sewage flow has slowed, but not completely stopped. Copper sulfate kills roots. If it can be placed into the system so that it will flow through the leach field, the roots will die (but not the plants) and waste water will begin to flow more freely again after a few weeks. In many systems, this isn’t as easy as it sounds, because copper sulfate is so heavy that it will settle to the bottom of the septic tank unless inserted into the leach line leading from the tank. If you have a cleanout or other access there, you’re all set, but many residential systems do not. I prefer the crystal form over the powder because it's easier to handle, cheaper and dissolves more slowly, .

Install a leach line cleanout

If necessary, it is not very expensive to have a cleanout installed in the leach line expressly for the purpose of adding copper sulfate periodically. If that still doesn’t quite work, or if you want to be sure the stuff is going to flow more quickly, you can pump it through the leach field.

It is possible to install a pump on the leach line cleanout between the septic tank and the leach field. It can be buried below ground level or installed above ground and concealed with landscape bushes. The pump turns on and off automatically to maintain a slight pressure on the waste water, pushing it through the pores of the seepage field. Adding copper sulfate at intervals through a cleanout at this point is effective to drive the chemical towards the offending roots.

Killing the roots may extend the life of the septic system a few years, but it will ultimately need to be replaced with a completely modern one—unless you can successfully lobby for a neighborhood hook-up, of course.

5 Tips to Keep Your Septic System Running Clean

Sewage Tank Pumping Contractor

What is a lint trap?

Lint traps are mesh screens that are designed to go over the discharge hose of a washing machine that empties into a sink, and are also known as lint snares or lint filters. They can be made of aluminum, stainless steel or nylon. They are used to capture any lint that is discharged from the water to keep it from going down the sink. Lint traps are more important today since washing machines no longer come with a built in lint filter, as a result, more lint gets washed down the drain, and stays on the clothes.

If you are anything at all like me, you realize the effect that lint from your laundry has on your pipes, sink and septic system. This lint that is discharged with the water, clogs your pipes and can harm the flow of your septic system. It took a while before I realized that there were pre made solutions out there that were easy to use and inexpensive to buy. To me time is money and searching for a old nylon stocking and finding something to attach it with onto the hose so that it wouldn’t come off when the water was coming out of the hose, was more of a pain and more expensive time-wise for me.

If I have to spend more than 15 minutes to create something, then it’s worth the $5 to just buy the solution. To create my own solution meant that I would have to find a nylon that was long enough and still had enough integrity to it to effectively filter out the lint. I would then have to find a rubber band that would twist tight enough to hold the nylon in place for until it was time to replace it. This solution worked in being able to reduce the lint, however the solution was always haphazard and took way to much time for me to spend to get it to work. Luckily I found these lint traps that are especially made for washing machine drain hoses to specifically filter the lint from the drain water. The particular snares I found are made of stainless steel and come with an attachment tie that holds the filter to the hose tight enough to keep it secure when the water discharges from the laundry machine. The great thing is that there is no additional equipment needed to attach them to the washing machine output hose. That means I don’t have to spend time searching the house for something to attach it with. Remember for me, time is money. Once the lint traps get full of lint, the best practice is to replace them when they are about 1/2 full, although I have seen them 90% full before they were changed.

5 packs of lint traps on Amazon are available for purchase or you can just search for washing machine hose lint filters on Amazon and see what comes up.


Some problems that Lint Snares keep us from having to experience:

- clogged sink drains that are caked with lint from the discharge water during the laundry machine spin cycle

- your sink filling up with water during the water discharge because the drainage screens get filled with lint over time and begin to block the water from draining out of the sink.

- globs of lint getting stuck to the side of the sink to have to be washed out time and time again… more maintenance!


Unfortunately these lint traps don't solve the problem of more lint on our clothes now after the wash cycle..... That is another problem for another solution to handle.

Washing Machine Lint Traps Facts

- Usually made in China but some are made in the USA too.
- comes in a range from a pack of 2 to a pack of 50 lint traps and ties.
- simple to install - includes ties to attach lint filters to the output hose and no additional tools are needed.
- large enough to fit almost all washer hose sizes.
- they can be made from stainless steel, aluminum or nylon
- they should be replaced when they are half full.

What are some benefits of Washing Machine Lint Traps?

1. Lint Traps Help to Protect Your Septic Sewage System

Households that utilize septic systems have to especially be aware of what goes down their drains and their toilets. With many homes, their drain water flows into the septic drain field, therefore it must remain clear of debris so water can pass freely through the drainage field. Most lint from the washing machine is made of non biodegradable particles and if these particles eventually build up in the lint field, then they will eventually create enough of a blockage to reduce the efficiency of the drain field, thus causing the septic system to fail over time because the water can no long pass through it easily. Filtering out the lint from the water will go a long way over time to keep the drainage field free of non biodegradable particles, so therefore, using lint snares will keep the health of your septic system in tact.

2. Washing Machine Lint Filters Protect the Household Plumbing

I have read many stories about homeowners having to deal with clogged pipes and needing to call the plumber out to clean the out. One particular story I read was the plumber showed the homeowner some of what was stuck in the pipe and there was a lot of lint fiber that was mixed with food particles and grease stuck to the pipe. That combination of substances cause a hard layer of coating that caked on the pipes over time. This particular plumber shared with the homeowner one thing that would keep that from occurring again. The plumber told the homeowner about lint traps and how that would keep the lint out of the drainage water. The homeowner had never heard of them before so they were quite grateful and began using them right away. They have since been rewarded with trouble free plumbing. It’s great when a plumber is willing to empower their customers enough to talk them out of future work!

When lint builds up from washing machine waste water, it can create problems for homeowners. The two mentioned above and in addition, lint build up from sinks can occur as well. That is one more thing that needs to be taken care of in regards to home maintenance that these filters can help you with. The good thing is that these solutions are very inexpensive and are very simple to install. They can be found at the hardware store, or on online places like Amazon and other retailer websites.

Septic Leach Field Lines Clogged by Tree Roots: Cheap Drain Fix

Sewage Tank

Understanding septic systems capabilities and limits is needed to ensure water quality. A septic system is a type of On-Site Sewage Facility and is a self-contained, underground waste-water treatment system. By using natural processes to treat the waste-water on-site, septic systems do not require the installation of miles of sewer lines, making them less disruptive to the environment. A septic system consists of a septic tank, a distribution system and a soil absorption system, also called a drain field. The septic tank is a watertight box, sometimes made out of concrete or fiberglass, with an inlet and outlet pipe. The septic tank treats the waste-water naturally by holding it in the tank long enough for solids and liquids to separate. The waste-water forms three layers inside the tank. Solids lighter than water float to the top forming a layer of scum.Solids heavier than water settle at the bottom of the tank forming a layer of sludge. This leaves a middle layer of partially clarified waste-water. The layers of sludge and scum remain in the septic tank where bacteria found naturally in the waste-water work to break the solids down. The sludge and scum that cannot be broken down are retained in the tank until the tank is pumped. The layer of liquid flows from the septic tank to the drain field. A drain a series of trenches lined with gravel or sand and below the ground. The drain field treats the waste-water by allowing it to slowly trickle from the pipes out into the gravel and down through the soil. The remaining impurities are trapped and disposed of in the soil. The excess water is eliminated through percolation into the soil, and eventually returning to the ground water, through evaporation, and by uptake through plants and transpiration.The Center for Watershed Protection notes that septic systems can be effective methods of water treatment, however failures are common in many areas. Even properly functioning septic systems can leak and are not designed to effectively deal with most of the phosphorus and nitrogen load found in the water it treats. Pathogenic fecal bacteria are also a concern. The primary concern for a municipality is proper maintenance of septic systems, and in some cases the total load of partially treated pollutants that can impact local drinking water and wildlife. A solid understanding of septic systems capabilities and limits, and a good government plan is needed to ensure water quality.

So, these are a few precautions that you may want to take if you are going to work on a septic tank system. This is important should you want to keep you and your family safe around the system. When in doubt, it’s a good idea to call a local septic service in Auburndale . Hopefully, these tips will help.

SEPTIC TANK CARE | WHO TO CALL FOR SERVICE IN Auburndale

Correct installation, overall system design and ongoing maintenance performed in your septic system will greatly extend the life and functionality of your homes onsite wastewater treatment center. Following theses prudent guidelines will soon be your first type of defense against overall system failure, odors, wet spots, gurgling sounds and early component breakage. Regular and frequent maintenance may help reduce the danger of well water contamination and can save you countless amounts of dollars in potential repair costs.

In most septic systems, wastewater from toilets, sinks, tubs, showers, floor drains and basins flows through a maze of piping out to your tank or pit. The tank is generally constructed of cement or plastic in newer systems with either perforations within the tank itself or in lateral or field lines on the outflow side of the septic. As solids enter the system, they settle to the underside of the septic while bacteria and enzymes decompose the material into water and gases. Fats, oils and grease float to the the surface of the tank and form a scum layer which generally reduces more slowly. Restrictors or baffles prevent the scum layer from leaving the tank and clogging the drainage areas. The tank or pit will normally have access ports consisting of covers or cleanse lines.

Septic system pumpers remove undigested solids through these access lines and may do a visual inspection through larger openings as part of a regular maintenance. There are numerous septic system designs ranging from single unit perforated tanks to multi compartment pre treatment reservoirs. Every one of the systems generally depend on bacteria and enzymes to break up waste right into a more manageable byproduct that the drainage area can quicker dispense of. With simple, bacteria rich waste entering the machine, most skeptics’provide several years of service and remain trouble free provided routine maintenance is adhered to. This optimal functionality might be idea but is often not the case in a real life environment. Most household cleaners comprising of laundry detergents, bleach, bath cleaners, kitchen cleaners, anti bacterial soaps and other common cleaners contain ingredients which can be for the most part detrimental to the healthy bacteria life within the system itself.

Newer, more bacteria friendly goods are arriving on shelves regularly but are sometimes difficult to find or simply don’t perform as efficiently as their more harmful counterparts. Though some systems allow this tainted or grey water to flow right into a separate leaching area, many systems were created to be able to allow these harsh chemicals to enter directly into the septic system, killing off massive levels of bacteria across the way. If you’re like many individuals, diverting your laundry and other grey water flow can pose a problem and is influenced by whether or not you have an appropriate location to do this and this rerouting is allowed by the local municipality. If you are in a position to reroute your grey water, typically a French drain or drywell system is employed to deal with the waste.

For the rest folks, working to boost the bacteria and enzyme counts within your system is the suitable approach to make certain system longevity and functionality. Cutting back on the utilization of, or trading out, harsh chemical cleaners may be the first faltering step to helping healthy bacteria flourish. Major retailers are now actually beginning to hold suitable lines of products that will effectively perform their function without killing off as much bacteria as their standard counterparts.

Adding concentrated bacteria to your system is the premier method of assuring that bacteria colonies ado not be reduced to a non-performing state. Luckily, bacteria additives made for septic tank maintenance and complete restoration from failure are readily available. Bacteria, added straight to the machine in a stabilized form, can offset the destructive power of most chemicals and keep your bacteria life healthy and easily available to digest the waste within your system.

Choosing bacteria that is chemical resistant and include a very good colony count is of the utmost importance since many over-the-counter products contain minimal amounts in comparison to commercial brands.

If you have a septic system and wish to assure that the whole system will perform at maximum capacity for the longest period of time possible, consider greening up your chemical use and utilize a regular septic tank maintenance product designed to increase your colony counts. Both of these methods are the most important factors in maintaining any septic tank or pit type system.

Click here : www.asapadvancedseptic.com


Polk County Sewage Tank Pumping

Home