Septic tanks are a great solution for remote or urban property owners who either cannot or do not want to be part of a municipal sewage system. A septic system is connected directly to the pipes of the residence or business and serves as an immediate filter and containment unit for water-bound domestic waste. There are certain risks related to the installation and maintenance of a septic tank; such risks have resulted in rules that need to be followed to protect the environment and property especially with the regular removal of the contents of the tank by a vacuum truck.
Frequency
Depending on the size of the unit and the household, a tank must be emptied every three to five years. This is necessary not only because of space limitations but also because the tank needs to be inspected with some regularity to check for cracks, leaks and blockages. Other reasons are as follows:
-
- Emergencies – Pumping can also become necessary in cases of emergency. Sewage backup and drain clogging may occur due to blockages which need to be cleared immediately to keep the problem from escalating. Flooding can cause similar problems.
-
- Precautionary Measure – Emptying the primary container can also be a precautionary measure when there are many household members; parties with many guests; or other circumstances where many people would be using the toilets.
-
- Odors – Sometimes tanks are suctioned due to permeating sewer odors escaping from the system as that could be a symptom of leaking gas needing to be repaired separately. Evidence of septic failure must be attended to immediately by a professional repair company.
- Selling Property – It is also customary to pump out the septic system before selling property.
Septic tanks serve a very useful purpose for many households. As long as properly maintained by regular pumping, cleaning and inspections, they should correctly function under all conditions and for a long service life. Hopefully this information will be helpful in knowing how a septic tank is cleaned!
Follow these safety tips given below when inspecting your septic system:
1. Septic tank lid
Make sure that the access port of your tank is covered with a solid lid. Make sure that the lid is strong enough. Kids should not be able to open it. If you have no idea as to how to install the system, you can call a professional for help. The company will be more than happy to help with the inspection.
2. The tank opening
You should never lean over the septic tank opening. The reason is that the gasses that come out of the tank may knock you out. You may also fall in the tank, which may prove fatal.
3. Driving Over The septic system
Driving heavy machine on the ground where the tank system is buried is not a good idea. Actually, you may have to bear heavy costs in order to get the broken pipes repaired. So, make sure you don’t drive heavy equipment or machinery on the ground where you buried the tank system.
Contact Info:
Name: Billy Fowler
Email: info@asapadvancedseptic.com
Organization: ASAP Advanced Septic & Drainage, Inc.
Address: 5011 E Busch Blvd, Tampa, FL 33617
Phone: (813) 986-6070
Clean Your Septic Tank Before the Party!
Now that you have chosen to maintain your septic system you are faced with a few question; how will you do it? Where will you start? How much money is it going to cost? Etc. Once you learn more about septic maintenance the more you will realize that choosing to maintain your septic system is a great decision that may potentially save you from terrible odors, clogging, and even more costly repairs.Your septic tank is container that relies on 2 things to work properly: gravity and bacteria. Gravity causes the waste to separate and settle in layers. Bacteria decomposes the waste.. Your septic tank is underground so you never know when you are going to have a problem. Using a septic treatment that contains bacteria and enzymes that boost the bacteria growth is the best and most reliable way to maintain your system. The best way to maintain your septic system is to monitor what goes into your tank and make sure to replenish the good bacteria in your tank.. Avoid harsh cleaners, anti-bacterial cleaners and soaps, and any items that are not organic. Because these items harm the good bacteria in your septic tank, it is important to use a septic maintenance product that contains bacteria and enzymes to replace and replenish those bacteria. Doing both of these things will make septic maintenance easy and affordable.
Washing Machine Lint Traps
In order to ensure that your septic tank has no damages, you need to monitor it regularly. It is necessary to get in touch with the health department in your area to know about the regulations in terms of maintaining a septic tank. In case you face some septic tank issues, you have to hire a septic tank repair professional to take care of the operation. Your local health department can surely help you in finding the professional. But to make sure that your tank is working well all the time, here are some precautions that you can consider. Always Maintain Your Septic System There are many things that you can do to maintain your septic tank and you can go online to get some ideas. But one common way is to always be aware of how long you have last pumped your tank. Also, you have to know the last time you had issues with it. A lot of sewer and cleaning services stressed that it is necessary to your tank every three to five years. As a precaution to some tank problems in the future, you should know where your septic system is exactly located. Be Alert in Determining Trouble Signs Whenever you suspect tank leaking, you must contact your local health department immediately so the situation can be dealt with. Leakage signs include grass growth abundance in the drain field and overflow of water around the system. If your home is situated near a river or lake you observe that your friends or family have been experiencing illnesses after they swam into the water source, find a professional to test your water because it may be contaminated already. Be alert with unusual odors which could develop around the place.
5 Tips to Keep Your Septic System Running Clean
Septic tank systems become clogged with roots in the leach lines, leach field, drain field or seepage field, causing backup of wastewater into the house. The inexpensive fix is to use copper sulfate through an installed cleanout or septic field pump. Septic tank systems do not last forever and replacing one is a very expensive proposition. If your house is connected to the city sewer system, then you do not have a septic tank. A septic tank can be described as your very own little sewage treatment plant. There are three basic elements of a septic system: Eventually leach fields become clogged because the roots from trees and other vegetation are attracted to the nutrient-rich effluent. The roots grow through the pores intended to drain the liquid, seepage gradually slows or stops. If sufficient pressure cannot be released through the pores of the leach field, the entire septic system cannot accept any more waste water and it backs up in the house, usually at a low point such as a shower or tub drain. If it gets that bad, you may have to replace the entire leach field. In many localities, that will require a building permit and meeting current building codes, which means replacing the entire septic system, which is expensive, etc. Since this is obviously something to avoid, you can often extend the life of the old system by taking action when sewage flow has slowed, but not completely stopped. Copper sulfate kills roots. If it can be placed into the system so that it will flow through the leach field, the roots will die (but not the plants) and waste water will begin to flow more freely again after a few weeks. In many systems, this isn’t as easy as it sounds, because copper sulfate is so heavy that it will settle to the bottom of the septic tank unless inserted into the leach line leading from the tank. If you have a cleanout or other access there, you’re all set, but many residential systems do not. I prefer the crystal form over the powder because it's easier to handle, cheaper and dissolves more slowly, . If necessary, it is not very expensive to have a cleanout installed in the leach line expressly for the purpose of adding copper sulfate periodically. If that still doesn’t quite work, or if you want to be sure the stuff is going to flow more quickly, you can pump it through the leach field. It is possible to install a pump on the leach line cleanout between the septic tank and the leach field. It can be buried below ground level or installed above ground and concealed with landscape bushes. The pump turns on and off automatically to maintain a slight pressure on the waste water, pushing it through the pores of the seepage field. Adding copper sulfate at intervals through a cleanout at this point is effective to drive the chemical towards the offending roots. Killing the roots may extend the life of the septic system a few years, but it will ultimately need to be replaced with a completely modern one—unless you can successfully lobby for a neighborhood hook-up, of course.Septic tank systems
A clogged leach field
Kill roots with copper sulfate
Install a leach line cleanout
Is Vinegar Safe for Septic Tanks?
The septic system in the house or the building they own is not something that most homeowners think about regularly. However, this can be a big mistake. When the worst-case scenario happens - you find that the system has failed or is failing - you must get it fixed quickly. So what exactly is a septic system? Hopefully you are not trying to find the answer to this question after learning you've got a big mess brewing under your lawn! A septic system is what allows us to dispose of waste at a safe distance from the home. It consists of two parts: a septic tank and a drainfield. The tank is where all the wastewater goes first. The tank holds the wastewater long enough for liquids and solids within the water to separate, and for bacteria to break down the solids. Any clarified water leftover from this process gets pumped into the drainfield, where it gets one more filtering and cleaning before trickling out into the soil. Don't redirect the sewage to a storm sewer, road ditch, or a farm drain tile. You're just creating a health hazard by polluting the water. Likewise, don't run the sewage into a sinkhole or drainage well as this pollutes the groundwater. This goes in hand with the "lack of maintenance" angle: Don't wait for the system to fail before pumping the septic tank. It's already too late by then. Note that repairing physical damage, improving surface and subsurface drainage, and installation of additional lines of absorption may not be enough - you might need to install a whole new system.
So, these are a few precautions that you may want to take if you are going to work on a septic tank system. This is important should you want to keep you and your family safe around the system. When in doubt, it’s a good idea to call a local septic service in Riverview . Hopefully, these tips will help.
SEPTIC TANK CARE | WHO TO CALL FOR SERVICE IN Riverview
What is a lint trap?
Lint traps are mesh screens that are designed to go over the discharge hose of a washing machine that empties into a sink, and are also known as lint snares or lint filters. They can be made of aluminum, stainless steel or nylon. They are used to capture any lint that is discharged from the water to keep it from going down the sink. Lint traps are more important today since washing machines no longer come with a built in lint filter, as a result, more lint gets washed down the drain, and stays on the clothes.
If you are anything at all like me, you realize the effect that lint from your laundry has on your pipes, sink and septic system. This lint that is discharged with the water, clogs your pipes and can harm the flow of your septic system. It took a while before I realized that there were pre made solutions out there that were easy to use and inexpensive to buy. To me time is money and searching for a old nylon stocking and finding something to attach it with onto the hose so that it wouldn’t come off when the water was coming out of the hose, was more of a pain and more expensive time-wise for me.
If I have to spend more than 15 minutes to create something, then it’s worth the $5 to just buy the solution. To create my own solution meant that I would have to find a nylon that was long enough and still had enough integrity to it to effectively filter out the lint. I would then have to find a rubber band that would twist tight enough to hold the nylon in place for until it was time to replace it. This solution worked in being able to reduce the lint, however the solution was always haphazard and took way to much time for me to spend to get it to work. Luckily I found these lint traps that are especially made for washing machine drain hoses to specifically filter the lint from the drain water. The particular snares I found are made of stainless steel and come with an attachment tie that holds the filter to the hose tight enough to keep it secure when the water discharges from the laundry machine. The great thing is that there is no additional equipment needed to attach them to the washing machine output hose. That means I don’t have to spend time searching the house for something to attach it with. Remember for me, time is money. Once the lint traps get full of lint, the best practice is to replace them when they are about 1/2 full, although I have seen them 90% full before they were changed.
5 packs of lint traps on Amazon are available for purchase or you can just search for washing machine hose lint filters on Amazon and see what comes up.
Some problems that Lint Snares keep us from having to experience:
- clogged sink drains that are caked with lint from the discharge water during the laundry machine spin cycle
- your sink filling up with water during the water discharge because the drainage screens get filled with lint over time and begin to block the water from draining out of the sink.
- globs of lint getting stuck to the side of the sink to have to be washed out time and time again… more maintenance!
Unfortunately these lint traps don't solve the problem of more lint on our clothes now after the wash cycle..... That is another problem for another solution to handle.
Washing Machine Lint Traps Facts
- Usually made in China but some are made in the USA too.
- comes in a range from a pack of 2 to a pack of 50 lint traps and ties.
- simple to install - includes ties to attach lint filters to the output hose and no additional tools are needed.
- large enough to fit almost all washer hose sizes.
- they can be made from stainless steel, aluminum or nylon
- they should be replaced when they are half full.
What are some benefits of Washing Machine Lint Traps?
1. Lint Traps Help to Protect Your Septic Sewage System
Households that utilize septic systems have to especially be aware of what goes down their drains and their toilets. With many homes, their drain water flows into the septic drain field, therefore it must remain clear of debris so water can pass freely through the drainage field. Most lint from the washing machine is made of non biodegradable particles and if these particles eventually build up in the lint field, then they will eventually create enough of a blockage to reduce the efficiency of the drain field, thus causing the septic system to fail over time because the water can no long pass through it easily. Filtering out the lint from the water will go a long way over time to keep the drainage field free of non biodegradable particles, so therefore, using lint snares will keep the health of your septic system in tact.
2. Washing Machine Lint Filters Protect the Household Plumbing
I have read many stories about homeowners having to deal with clogged pipes and needing to call the plumber out to clean the out. One particular story I read was the plumber showed the homeowner some of what was stuck in the pipe and there was a lot of lint fiber that was mixed with food particles and grease stuck to the pipe. That combination of substances cause a hard layer of coating that caked on the pipes over time. This particular plumber shared with the homeowner one thing that would keep that from occurring again. The plumber told the homeowner about lint traps and how that would keep the lint out of the drainage water. The homeowner had never heard of them before so they were quite grateful and began using them right away. They have since been rewarded with trouble free plumbing. It’s great when a plumber is willing to empower their customers enough to talk them out of future work!
When lint builds up from washing machine waste water, it can create problems for homeowners. The two mentioned above and in addition, lint build up from sinks can occur as well. That is one more thing that needs to be taken care of in regards to home maintenance that these filters can help you with. The good thing is that these solutions are very inexpensive and are very simple to install. They can be found at the hardware store, or on online places like Amazon and other retailer websites.